<h2 class="wp-block-heading tablecontent">What is PulseChain?</h2>



<p>PulseChain is an Ethereum-compatible Layer 1 blockchain that launched its mainnet in May 2023. It is a full fork of the Ethereum system state, meaning every wallet, token, and smart contract that existed on Ethereum at the time of the snapshot was copied over to <a href="https://pulsechain.com/" data-type="link" data-id="https://pulsechain.com/">PulseChain</a>. The network uses Delegated Proof-of-Stake consensus, offering faster block times and significantly lower transaction fees.</p>



<p>PulseChain has 4 unique benefits which make it worthy of consideration as a long term investment.</p>



<p>1. <strong>Lower gas fees.</strong> PulseChain has significantly cheaper gas fees than Ethereum. It uses a Delegated Proof-of-Stake consensus with fast block production (approximately 3 seconds per block), compared to Ethereum&#x27;s current average of around 12 seconds post-Merge. This means faster transaction confirmations and, combined with lower network congestion, fees that typically cost fractions of a cent rather than the dollars or tens of dollars common on Ethereum during busy periods.</p>



<p><strong>2. World’s largest free airdrop. </strong>Unlike previous hard-forks of Ethereum, PulseChain will be a complete system-state copy. This means that all previously developed tokens and smart contracts on the <a data-wpil-monitor-id="89" href="https://www.thecoinzone.com/blockchain/ashdraked-meaning/">Ethereum blockchain</a> will be duplicated on PulseChain. This is easy for tokens and protocols like Hex which will function easily on the new chain. This is more difficult for protocols like Liquity, who’s code is too dependent on infrastructure on Ethereum to function on PulseChain. Check here if your favorite <a href="https://en.cryptonomist.ch/erc20-tokens-list/" target="_blank" rel="noreferrer noopener">ERC20 tokens</a> will be copied over onto Pulsechain</p>



<p><strong>3. Reduced energy consumption and environmental pollution.</strong> PulseChain will launch using the Delegated Proof-of-Stake consensus mechanism. This removes the wasteful properties of Proof-of-Work consensus, which uses high amounts of electricity to mine new blocks and earn protocol inflation. Instead, PulseChain rewards validators and users who delegate their PLS to them to lock up their coins. This process uses far less electricity than Proof-of-Work networks.</p>



<p><strong>4. Improved game theory. </strong>Pulsechain has 0% inflation because it rewards validators and stakers with fees instead of inflated PLS. In addition, 25% of PLS fees are burnt to reduce circulating supply. This is preferable to Bitcoin, for example, which pays miners BTC inflation who have no other choice except to <a href="https://www.thecoinzone.com/wealth-building/buy-the-rumor-sell-the-news/" data-wpil-monitor-id="538">market sell</a> in order to maintain profitability.</p>



<h2 class="wp-block-heading tablecontent">PulseChain vs Ethereum: Key Differences</h2>





<p><strong>When to use PulseChain</strong>: If gas fees are preventing you from making small trades, staking frequently, or experimenting with DeFi, PulseChain&#x27;s near-zero fees make it accessible at any portfolio size.</p>



<p><strong>When to stay on Ethereum</strong>: If you need access to the deepest liquidity pools, the most established protocols, or you&#x27;re moving large sums where the fee difference is negligible.</p>



<h2 class="wp-block-heading tablecontent">How to Add PulseChain to MetaMask (Step-by-Step)</h2>



<p>PulseChain is EVM-compatible, so any wallet that supports custom networks works. MetaMask is the most common choice.</p>



<p><strong>Step 1: Open MetaMask and go to Settings &gt; Networks &gt; Add Network</strong></p>



<p><strong>Step 2: Enter the following network details:</strong></p>





<p><strong>Step 3: Click Save.</strong> PulseChain will now appear in your network dropdown.</p>



<p><strong>Step 4: Switch to the PulseChain network.</strong> Your existing Ethereum tokens copied in the airdrop will appear automatically.</p>



<p><span style="text-decoration:underline">Important</span>: Only use RPC endpoints from official sources. Verify details at pulsechain.com or <a href="https://go.pulsechain.wiki/getting-started/getting-started" data-type="link" data-id="https://go.pulsechain.wiki/getting-started/getting-started">go.pulsechain.wiki</a> before entering them into your wallet. Phishing sites mimic official branding — always check the URL.</p>



<h2 class="wp-block-heading tablecontent">How to Bridge Assets from Ethereum to PulseChain</h2>



<p>Bridging is how you move ETH, stablecoins, or ERC20 tokens from Ethereum onto PulseChain to take advantage of lower fees.</p>



<ol class="wp-block-list">
<li>Go to the official <a href="https://bridge.pulsechain.com/" data-type="link" data-id="https://bridge.pulsechain.com/">PulseChain bridge</a> (linked from pulsechain.com). Do not use any bridge you find via a search ad — always navigate directly from the official site.</li>



<li>Connect your MetaMask wallet. Make sure you have a small amount of ETH on Ethereum to cover the bridge transaction gas fee.</li>



<li>Select the asset and amount you want to bridge. Start with a small test amount (e.g., $10–$20 worth) before bridging larger sums.</li>



<li>Confirm the transaction in MetaMask. Bridging typically takes a few minutes depending on Ethereum network congestion.</li>



<li>Switch your MetaMask network to PulseChain. Your bridged assets will appear in your wallet.</li>
</ol>



<p><strong>Fee note</strong>: You pay Ethereum gas once to bridge. After that, all transactions on PulseChain cost fractions of a cent in PLS.</p>



<p><strong>Security reminder</strong>: Verify the bridge URL against the official pulsechain.com site every time. Scam bridges are common in the PulseChain ecosystem.</p>



<h2 class="wp-block-heading tablecontent">Where Can I Buy PulseChain ($PLS)?</h2>



<p>Use this guide on <a rel="noreferrer noopener" href="https://www.thecoinzone.com/pulsechain/how-to-buy-pls-step-by-step-guide" target="_blank"><strong>How to Buy PLS</strong></a>.</p>



<p>PulseChain has been live since May 2023 and PLS is available through multiple channels. Here is a quick comparison of your options:</p>





<p><strong>Recommendation for beginners</strong>: Buy on a centralized exchange like OKX, then withdraw to your own MetaMask wallet on PulseChain for self-custody.</p>



<h2 class="wp-block-heading tablecontent">What is PulseX?</h2>



<p>PulseX, rooted in the name PulseChain Exchange, is the most liquid decentralized exchange on the PulseChain network. Similar to how PulseChain is a copy of Ethereum with amendments to functionality, PulseX is a copy of <a href="https://www.thecoinzone.com/defi/uniswap-v3-the-complete-guide" target="_blank" rel="noreferrer noopener"><strong>Uniswap</strong></a>/Pancakeswap with key improvements. Since these exchanges are <a href="https://www.thecoinzone.com/defi/automated-market-maker" target="_blank" rel="noreferrer noopener"><strong>automated market makers</strong></a>, they will allow for trustless trading using smart contracts and <strong><a href="https://www.thecoinzone.com/defi/liquidity-pools" target="_blank" rel="noreferrer noopener">liquidity pools</a></strong>.</p>



<p>Similar to PulseChain, PulseX had a sacrifice period in which crypto enthusiasts could make a political statement around freedom of movement. Additionally, the <strong>PulseX sacrifice has ended </strong>so do not send any more funds to the sacrifice address. You can check your balances here at pulselead.xyz.</p>



<p>PulseX’s main use cases are:</p>



<ul class="wp-block-list">
<li><strong>Liquidity Pools. </strong>Liquidity providers will be able to insert liquidity into pools to allows for traders to swap tokens back and forth without middlemen in between. Every time somebody uses these pools, a small fee of 0.25% is generated. 0.17% goes to liquidity providers, 0.03% goes to the official PulseX treasury, and 0.05% contributes to a burn and buy function to promote deflation of the token. </li>



<li><strong>ETH/PLS Bridge. </strong>PulseX will have a built in bridge to allow users to transfer value to and from the Ethereum blockchain and the PulseChain. This is a key functionality since, at first, PulseChain will be a closed system. Along with fiat on-ramps, the Pulsex bridge will allow economic energy to flow into the new blockchain. </li>



<li><strong>Limit Orders. </strong>Limit orders allow traders to specify a price that they would like to execute an order. Limit orders have the benefit of reducing <a href="https://www.thecoinzone.com/defi/slippage" target="_blank" rel="noreferrer noopener"><strong>slippage</strong></a> and time spent by users monitoring the market. </li>



<li><strong>Deflationary. </strong>Once the code is deployed, all PLSX will be in existence and there is no additional minting. As stated above, a portion of the trading fees will be used to buy and burn PLSX providing only a deflationary token environment.</li>



<li><strong>PLSX Staking. </strong>PLSX token will have a staking function on PulseX. Users can stake PLSX in single-sided-staking pools with no lockup period. </li>
</ul>



<h2 class="wp-block-heading tablecontent">PulseChain Safety Guide: How to Avoid Scams</h2>



<p>PulseChain has attracted significant scam activity due to its popularity. Follow these rules before sending any funds:</p>



<ul class="wp-block-list">
<li><strong>Verify every URL</strong>. Official sites are pulsechain.com, app.pulsex.com, and scan.pulsechain.com. Bookmark these directly.</li>



<li><strong>Never use a bridge found via a Google ad</strong>. Scam bridges appear above official results in paid search. Always navigate directly.</li>



<li><strong>Use a hardware wallet for large balances</strong>. Ledger and Trezor both support PulseChain via MetaMask integration.</li>



<li><strong>The sacrifice is over</strong>. Any site claiming you can still sacrifice for PulseChain or PulseX is a scam. Both sacrifice phases ended in 2021.</li>



<li><strong>Test with small amounts first</strong>. Before bridging significant funds, send $10–$20 and confirm it arrives correctly.</li>



<li><strong>Check the network before signing</strong>. Always verify your MetaMask is on PulseChain (Chain ID 369) before approving any transaction.</li>
</ul>



<h2 class="wp-block-heading tablecontent">The PulseChain Sacrifice Phase: Historical Context</h2>



<p>The PulseChain sacrifice phase was a 30-day window in the summer of 2021 in which participants sent funds to a sacrifice address to make a political statement about free speech and blockchain technology. This phase has long since ended.</p>



<p><strong><span style="text-decoration:underline">IMPORTANT</span></strong>: The PulseChain sacrifice is permanently closed. Any website or person claiming you can still participate in a PulseChain sacrifice is attempting to steal your funds. Do not send money to any sacrifice address.</p>



<p>If you participated in the sacrifice, you can check your sacrifice points at <a href="https://pulselead.xyz/" data-type="link" data-id="https://pulselead.xyz/">PulseLead.xyz</a>. The sacrifice points determined initial token allocations at the time of mainnet launch in May 2023.</p>



<h2 class="wp-block-heading tablecontent">FAQ</h2>



<h5 class="wp-block-heading">What is the Hex PulseChain airdrop?</h5>



<p>The Hex PulseChain Airdrop refers to the copies of all Ethereum Hex that will be airdropped to the same wallets on PulseChain. If an ethereum wallet is holding 100,000 Hex (both staked or liquid) before the snapshot, they will receive an exact copy. The Hex smart contract will function identically on PLS as it did on ETH, just with faster transactions and lower fees. </p>



<h5 class="wp-block-heading">How do I buy PulseChain?</h5>



<p>PulseChain is live and PLS is available through multiple methods. You can buy PLS directly on PulseX (the native DEX), through centralized exchanges like OKX, or by bridging ETH or stablecoins to PulseChain and swapping on a DEX. See the full step-by-step guide in the &#x27;Where Can I Buy PulseChain&#x27; section above.</p>



<h5 class="wp-block-heading">How much PulseChain will I get?</h5>



<p>If you’re asking how much PulseChain you will get from your sacrifice, you can check that on <a rel="noreferrer noopener" href="https://www.pulsexlead.com/" target="_blank">Pulselead.xyz</a>. </p>



<h5 class="wp-block-heading">Is PulseChain the same as Ethereum 2.0?</h5>



<p>No. PulseChain is a separate blockchain that forked from Ethereum&#x27;s codebase and state. Ethereum 2.0 (now called the Ethereum Consensus Layer) refers to Ethereum&#x27;s own upgrade from Proof-of-Work to Proof-of-Stake, which happened in September 2022. PulseChain and Ethereum are two distinct networks that can interact via bridges.</p>



<h5 class="wp-block-heading">What wallet do I use for PulseChain?</h5>



<p>Any EVM-compatible wallet works with PulseChain. MetaMask is the most widely used. Add PulseChain as a custom network using Chain ID 369 and RPC URL https://rpc.pulsechain.com. See the full setup guide above.</p>



<h5 class="wp-block-heading">Is PulseChain safe to use?</h5>



<p>PulseChain itself is an established live network. The risks are primarily user-side: phishing sites, scam bridges, and fake sacrifice schemes. Always verify URLs against pulsechain.com and never send funds to a sacrifice address — both sacrifice phases ended in 2021.</p>



<h5 class="wp-block-heading">What is the difference between PLS and PLSX?</h5>



<p>PLS is the native gas token of PulseChain, used to pay for all transactions on the network. PLSX is the governance and utility token of PulseX, the primary DEX on PulseChain. PLSX can be staked for a share of trading fees.</p>

PulseChain Contract Addresses: Complete Guide and Quick-Start FAQ

The Richard Heart Case Is Dead in the Water — And Crypto’s Sailing Free

A PulseChain (PLS) Accumulation Strategy Using Liquid Loans

PulseChain Gas Fees Explained (How Much Cheaper than Ethereum?

PulseChain Official Guide: How to Set Up, Buy PLS, and Start Using the Network

PulseChain is an Ethereum-compatible Layer 1 blockchain with near-zero gas fees and 3-second block times. Learn how it compares to Ethereum, how to add it to MetaMask, and where to buy PLS.